Trombone Stiffness

[Tom Droege <tdroege@veriomail.com>]

Looks like I have a solution for the focus tilt.  The trombone mount was 
wobbling a little as the focus moved in and out.  This gave the possibility 
of the focus changing over the CCD.  A little glue stiffened up the mount 
and there is a big improvement.  I just had set screws holding the bars to 
the trombone rods, and even though I had them bored for a tight fit, there 
was enough slop that they would wobble a little.  Just a little glue and 
they stiffened right up.

I think I am getting down to the bottom of the barrel of things that I want 
to try to fix.

Tom Droege